Adhesive Backed Safety Sign Sheet
Color Structure:
Yellow Face / Black CoreAdhesive Type:
3M 468MPMaterial Options:
PMMA / Acrylic or ABSProcessing Compatibility:
PMMA / Acrylic: CO2 Laser Engraving & Laser Cutting; ABS: CNC / Rotary EngravingThickness:
0.1 / 0.3 / 0.5 / 0.8 / 1.3 / 1.5 / 3.0 mmStandard Size:
600 × 1200 mmCustom Size:
AvailableSurface Finish:
MatteApplications:
Safety Signs / Warning Labels / Electrical Identification / Machine Labels
LYSHIRE Adhesive Backed Safety Sign Sheet LYS-8807 features a yellow face and black core with optional 3M 468MP adhesive backing for fast installation on suitable flat surfaces. It is designed for industrial warning labels, machine safety identification, electrical cabinets and facility signage, with PMMA/acrylic or ABS configurations available according to the required processing method.
Model:LYS-8807
Send Inquiry
Product Description
LYSHIRE ADHESIVE BACKED SAFETY SIGN SHEET | LYS-8807
Adhesive Backed Safety Sign Sheet
LYS-8807 is a two-ply engraving sheet with a yellow face and black core, available with optional 3M 468MP adhesive backing for efficient installation on suitable flat surfaces. The high-contrast color structure is well suited to industrial warning labels, machine safety identification, electrical marking and facility signage.
Color Structure Yellow Face / Black Core
Adhesive 3M 468MP Optional
Primary Use Safety / Warning Identification
Adhesive Backing
Optional 3M 468MP for Fast Installation
LYS-8807 can be supplied with 3M 468MP adhesive backing laminated to the rear surface of the engraving sheet. During installation, the release liner is peeled away while the adhesive layer remains on the back of the sheet, allowing the finished safety label or warning sign to be applied directly to a suitable clean and smooth mounting surface.
Adhesive-backed supply is useful for control cabinets, equipment housings, machine guards, facility panels and other applications where a clean installation without visible mechanical fasteners is preferred.
Material & Processing Options
PMMA/Acrylic or ABS Configurations
PMMA / Acrylic Version
PMMA/acrylic configurations are suitable for CO2 laser engraving and laser cutting. CNC cutting and drilling can also be used where required.
ABS Version
ABS configurations are intended for CNC and rotary engraving, routing and drilling where mechanical machining is preferred.
Adhesive-Backed Supply
Both material systems can be supplied according to project requirements with optional 3M 468MP adhesive backing, custom sizes and cut-part specifications.
Technical Data
LYS-8807 Product Parameters
| Model | LYS-8807 |
|---|---|
| Color Structure | Yellow Face / Black Core |
| Adhesive Type | 3M 468MP Optional |
| Material Options | PMMA / Acrylic or ABS |
| Processing Compatibility | PMMA / Acrylic: CO2 Laser Engraving & Laser Cutting; ABS: CNC / Rotary Engraving |
| Available Thicknesses | 0.1 / 0.3 / 0.5 / 0.8 / 1.3 / 1.5 / 3.0 mm; custom 2.0 / 2.5 mm available |
| Standard Size | 600 × 1200 mm |
| Other Sizes | 610 × 1220 mm / 600 × 600 mm / 610 × 610 mm / 305 × 610 mm / 300 × 600 mm / Custom Sizes |
| Surface Finish | Matte |
| Applications | Safety Signs / Warning Labels / Electrical Identification / Machine Labels / Facility Signage |
Machine Safety
Industrial Warning and Hazard Labels
The yellow face and black engraved core provide strong contrast for machine warning labels, hazard identification and safety information. LYS-8807 can be fabricated into equipment caution signs, hot-surface labels, moving-part warnings and other industrial identification components.
The optional 3M 468MP backing allows finished signs and labels to be installed efficiently on suitable machine housings, panels and guards.
Electrical Identification
Electrical Cabinet and Disconnect Labels
LYS-8807 is suitable for electrical cabinet labels, disconnect identification, hazardous-voltage warnings and related industrial marking. The black engraved core remains clearly visible against the yellow face for high-contrast information.
Adhesive-backed supply is useful for repeat electrical-identification labels where consistent positioning and efficient installation are required.
Equipment Safety
Machine Guard and Moving-Parts Warnings
LYS-8807 can be fabricated into caution signs and warning labels for machine guards, moving parts, restricted areas and equipment service points. Text, pictograms, symbols and project-specific information can be engraved according to buyer requirements.
Yellow and black are widely recognized as a high-visibility combination, but final wording, symbols and safety classification must be selected and approved by the buyer or end user for the intended application.
Safety Identification Notice
- Product color alone does not establish a specific hazard class, safety level or regulatory meaning.
- Final warning wording, symbols and installation location must be confirmed by the buyer or end user.
- Apply adhesive-backed labels to clean, dry and suitable flat surfaces.
- Remove dust, oil, moisture and other contamination before installation.
- Adhesive performance depends on substrate type, surface condition, temperature and application pressure.
B2B Supply
Adhesive-Backed Safety Sign Material Supply
LYSHIRE supplies adhesive-backed engraving materials to industrial-label producers, safety-sign fabricators, equipment builders, electrical-panel manufacturers, engraving-material distributors and OEM project buyers. Material type, thickness, sheet size, cut-part requirements and 3M 468MP adhesive backing can be configured according to project requirements.
Standard MOQ is 500 sheets with mixed colors available. Qualified B2B buyers can request samples for material, engraving and adhesive evaluation before bulk purchasing.
Buyer Questions
Frequently Asked Questions
What adhesive backing is available for LYS-8807?
LYS-8807 can be supplied with optional 3M 468MP adhesive backing. During installation, the release liner is removed while the adhesive remains laminated to the rear surface of the engraving sheet.
Can LYS-8807 be supplied as PMMA/acrylic or ABS?
Yes. PMMA/acrylic and ABS versions can be produced according to the required processing method and project specification.
Which processing methods are suitable?
PMMA/acrylic versions are suitable for CO2 laser engraving and laser cutting, with CNC cutting and drilling also supported. ABS versions are intended for CNC and rotary engraving, routing and drilling.
Is yellow and black limited to one type of safety sign?
No. LYS-8807 is supplied as engraving material. Final wording, symbols, hazard classification and installation use are determined by the buyer according to the required application.
Can other LYSHIRE colors also be supplied with 3M 468MP?
Yes. Adhesive backing can be supplied with other LYSHIRE color combinations according to order requirements.
B2B ENGRAVING MATERIAL SUPPLY
Need Safety Sign Material for Your Project?
Send us your required color, material, thickness, sheet size, quantity, processing method and application. LYSHIRE can recommend the appropriate engraving sheet configuration and prepare samples or a quotation for evaluation.
Send Inquiry Hot Tags: adhesive backed safety sign sheet, yellow black engraving sheet, self adhesive safety sign material, 3M 468MP engraving sheet, industrial warning label material, adhesive backed engraving plastic, safety identification sheet
Related Category
Adhesive Backed Sheets
UV Resistant Sheets
Outdoor Grade Sheets
Scratch Resistant Sheets
Reverse Engraving Sheets
Fluorescent Sheets
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
Related Products
