Home > Products > Function System > Adhesive Backed Sheets > Brushed Silver Adhesive Backed Engraving Sheet
Brushed Silver Adhesive Backed Engraving Sheet
Color Structure:
Brushed Silver Face / Black CoreAdhesive Type:
3M 468MPMaterial Options:
PMMA / Acrylic or ABSProcessing Compatibility:
PMMA / Acrylic: CO2 Laser Engraving & Laser Cutting; ABS: CNC / Rotary EngravingThickness:
0.1 / 0.3 / 0.5 / 0.8 / 1.3 / 1.5 / 3.0 mmStandard Size:
600 × 1200 mmCustom Size:
AvailableApplications:
Equipment Nameplates / Control Panels / Machine Labels / Electrical Room Signs / Industrial Identification
LYSHIRE Brushed Silver Adhesive Backed Engraving Sheet LYS-7067 features a brushed silver face and black core with optional 3M 468MP adhesive backing for professional equipment nameplates, control panels, machine labels and industrial identification. PMMA/acrylic or ABS configurations are available according to the required processing method.
Model:LYS-7067
Send Inquiry
Product Description
LYSHIRE BRUSHED SILVER ADHESIVE BACKED ENGRAVING SHEET | LYS-7067
Brushed Silver Adhesive Backed Engraving Sheet
LYS-7067 is a two-ply engraving sheet with a brushed silver face and black core, available with optional 3M 468MP adhesive backing for professional industrial identification. The metallic brushed finish is suitable for equipment nameplates, control panels, machine labels, electrical-room signs and premium industrial signage.
Surface Finish Brushed Silver
Adhesive 3M 468MP Optional
Primary Use Nameplates / Industrial ID
Adhesive Backing
Optional 3M 468MP for Clean Industrial Installation
LYS-7067 can be supplied with 3M 468MP adhesive backing laminated to the black rear surface of the engraving sheet. During installation, the release liner is removed while the adhesive remains on the rear of the sheet, allowing the finished label or nameplate to be applied directly to a suitable clean and smooth surface.
Adhesive-backed supply is especially useful for thin metallic-look labels, equipment identification, control cabinets and other applications where a clean appearance without visible mechanical fasteners is preferred.
Material & Processing Options
PMMA/Acrylic or ABS Configurations
PMMA / Acrylic Version
PMMA/acrylic configurations are suitable for CO2 laser engraving and laser cutting. CNC cutting and drilling can also be used where required.
ABS Version
ABS configurations are intended for CNC and rotary engraving, routing and drilling where mechanical machining is preferred.
Brushed Metallic Finish
The brushed silver surface provides a refined metallic appearance while retaining a contrasting black core for engraved text, symbols and industrial identification.
Technical Data
LYS-7067 Product Parameters
| Model | LYS-7067 |
|---|---|
| Color Structure | Brushed Silver Face / Black Core |
| Adhesive Type | 3M 468MP Optional |
| Material Options | PMMA / Acrylic or ABS |
| Processing Compatibility | PMMA / Acrylic: CO2 Laser Engraving & Laser Cutting; ABS: CNC / Rotary Engraving |
| Available Thicknesses | 0.1 / 0.3 / 0.5 / 0.8 / 1.3 / 1.5 / 3.0 mm; custom 2.0 / 2.5 mm available |
| Standard Size | 600 × 1200 mm |
| Other Sizes | 610 × 1220 mm / 600 × 600 mm / 610 × 610 mm / 305 × 610 mm / 300 × 600 mm / Custom Sizes |
| Surface Finish | Brushed Silver Metallic Finish |
| Applications | Equipment Nameplates / Control Panels / Machine Labels / Electrical Room Signs / Industrial Identification |
Control Panels
Brushed Silver Control Panel Labels
The brushed silver finish provides a professional metallic appearance for control-panel labels, switch legends, operator identification and machine-control marking. The engraved black core creates clear contrast while maintaining a premium industrial look.
Optional 3M 468MP backing allows labels to be installed efficiently on suitable control cabinets and equipment panels.
Equipment Nameplates
Machine and Equipment Identification
LYS-7067 is suitable for equipment nameplates, machine data plates, compressor identification, serial references and industrial asset marking. The brushed metallic surface provides a refined appearance while the black core creates durable high-contrast engraved information.
Adhesive-backed supply is useful for repeat nameplate programs where clean appearance, efficient installation and consistent positioning are important.
Facility Identification
Electrical Room and Facility Signs
The brushed silver and black structure is also suitable for electrical-room signs, restricted-area identification, facility labels and professional directional signage where a metallic visual finish is preferred.
Custom wording, symbols, room identification and facility information can be produced according to project requirements.
Brushed Surface and Adhesive Notes
- The brushed pattern direction should be confirmed before cutting or batch fabrication.
- Apply adhesive-backed labels to a clean, dry and suitable flat surface.
- Remove dust, oil, moisture and other contamination before installation.
- Adhesive performance depends on substrate type, surface condition, temperature and application pressure.
- Final finish, shade and engraving appearance should be confirmed by sample where required.
B2B Supply
Brushed Silver Adhesive-Backed Material Supply
LYSHIRE supplies brushed silver adhesive-backed engraving materials to equipment builders, nameplate manufacturers, industrial-label producers, panel builders, engraving-material distributors and OEM project buyers. Material type, thickness, sheet size, cut-part requirements and 3M 468MP adhesive backing can be configured according to project requirements.
Standard MOQ is 500 sheets with mixed colors available. Qualified B2B buyers can request samples to evaluate surface finish, engraving contrast and adhesive performance before bulk purchasing.
Buyer Questions
Frequently Asked Questions
What adhesive backing is available for LYS-7067?
LYS-7067 can be supplied with optional 3M 468MP adhesive backing. During installation, the release liner is removed while the adhesive remains laminated to the black rear surface of the engraving sheet.
Can LYS-7067 be supplied as PMMA/acrylic or ABS?
Yes. PMMA/acrylic and ABS versions can be produced according to the required processing method and project specification.
Which processing methods are suitable?
PMMA/acrylic versions are suitable for CO2 laser engraving and laser cutting, with CNC cutting and drilling also supported. ABS versions are intended for CNC and rotary engraving, routing and drilling.
Can the brushed direction be specified?
Brushed orientation should be confirmed before batch production, especially for coordinated nameplate, panel and signage projects where visual consistency is important.
Can custom sizes and cut parts be supplied?
Yes. Standard sheets, custom sizes and cut-to-size parts can be discussed according to required dimensions, thickness, quantity and processing method.
B2B ENGRAVING MATERIAL SUPPLY
Need Brushed Silver Material for Your Project?
Send us your required material, thickness, sheet size, quantity, processing method and application. LYSHIRE can recommend the appropriate brushed silver engraving sheet configuration and prepare samples or a quotation for evaluation.
Send Inquiry Hot Tags: brushed silver adhesive backed engraving sheet, brushed silver engraving plastic, 3M 468MP engraving sheet, metallic engraving sheet, adhesive backed nameplate material, brushed silver industrial label material, engraving laminate with adhesive
Related Category
Adhesive Backed Sheets
UV Resistant Sheets
Outdoor Grade Sheets
Scratch Resistant Sheets
Reverse Engraving Sheets
Fluorescent Sheets
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
